This guide lists admin commands for your Conan Exiles server.
These commands will only work properly if entered by a player with admin privileges connected to the server. Conan Exiles does not have an input channel on the Console tab of the Nodecraft control panel, so these commands cannot be used in the automated tasks panel.
| Command | Value | Effect |
| MakeMeAdmin | admin password | Gives you admin privileges, allowing you to use admin commands. Requires that an admin password be set on the server, by adding it in the ServeSettings.ini config file. |
| MakeMeNormal | N/A | Removes admin privileges |
Server Administration
Commands related to running the server, server stats, and settings.
| Command | Value | Effect |
| GetServerHealth | N/A | Lists stats about FPS, and number of spawned "actors" (NPC's), player built structures, and objects on the server. |
| ToggleDebugHUD | N/A | Displays the current server performance, a list of all players as well as the current coordinates |
| GetAllServerSettings | N/A | Lists all available server settings you can modify |
| SetServerSetting | Setting Value | Modifies a server setting contained in ServerSettings.ini config file. |
| p.clothphysics | value | Sets dynamic cloth movement speed to value. |
| p.ShadowQuality | value | Sets shadow transparency to value. |
| FlushLog | N/A | Clears server event log. |
Commands for keep track of players, and finding information out about them.
| Command | Value | Effect |
| BroadcastMessage | message text | Sends message text to all online players except admins, by creating a pop-up box. The box must be clicked to make it go away, and players are frozen in place until the box is removed. Can be very disruptive to gameplay. |
| ShowPlayers | N/A | Lists connected players, and Steam ID's. |
| PrintPlayerInfo | player name or Steam64ID | Returns the opposite value, You can enter a players character name to get their Steam name or you can enter the Steam name to get their character name. You have to tap the ~ key twice to see the output |
| ViewPlayer | player name | Display a player |
| ViewSelf | N/A | Display yourself |
| PlayerCanBuildEverywhere | player name | Allows building where it is normally disabled for the specified player. |
Movement
Commands that make it easier for admins to move about the server and avoid attack by NPC's.
| Command | Value | Effect |
| Teleport | X Y Z coordinates | Teleport to these coordinates |
| TeleportPlayer | <player name> <coordinates> | Teleport the player to these coordinates |
| TeleportToPlayer | player name | Teleports yourself to the specified player |
| SummonPlayer | player name | Teleport the player to your location |
| NoSprintCost | N/A | Unlimited Sprint mode – no stamina drain while sprinting |
| God | N/A | Gives you god mode – immortal, no damage, except from the cursed wall |
| Fly | N/A | Flymode |
| Cloak | N/A | NPCs can´t see you and don´t attack you, even if you attack them |
| Invisibility | N/A | Makes your character invisible |
| Ghost | N/A | Invisible to other players – no collision mode, Noclip – you can pass through objects |
| Walk | N/A | Exit the fly, ghost or godmode |
Commands related to the purge events, allowing admins to empty or fill the purge meters, and manually start or stop purges.
Commands with values of " - " will require targets, such as a player name or a clan name.
| Command | Value | Effect |
| FillPlayerPurgeMeter | - | Sets player individual purge meter to max, allowing possibility of a purge happening. Doesn't automatically start a purge. |
| FillPlayerClanPurgeMeter | - | Fill the purge meters of a clan to max. |
| EmptyPlayerClanPurgeMeter | - | set the purge meters of a single player or clan to zero. |
| FillClanPergeMeter | - | Single player mode only, and YES! this command is actually spelled that way, with "Perge" instead of "Purge". |
| FillAllClanPurgeMeters | - | Set purge meter to max, allowing possibility of a purge to start. Does not automatically start a purge. |
| EmptyAllClanPurgeMeters | - | Reset all clans's purge meters to zero. |
| StartPlayerPurge | N/A | Immediately starts a purge, if the purge meter is full. |
| EndPurge | N/A | Immediately ends a purge |
| StartNextPurgePhase | N/A | Forces a new purge. |
| StartNextWave | N/A | Advances ongoing purge to next wave. |
Misc. Commands
| Command | Value | Effect |
| DamageTarget | Value | Damages the NPC or object in your crosshair by value amount. |
| DestroyTarget | N/A | Destroys the target in your crosshair. (Be cautious when using this command, as it can destroy parts of the map when aimed on the world! If this occurs, restart to recover the missing map-part) |
| Spawnitem | itemID Quantity | Gives you an item in the wanted Quantity |
| LevelFollowerUpTo | value | Levels follow up to value (max 20). |
| LearnEmote | emote name | Unlocks ability to perform specified emote. |
FAQs
Minecraft Server Admin/Op commands are entered into the chat window and are preceded by a “/” when playing in-game, but when entering commands at the server console you need to miss out the preceding “/”. help or ? Shows a list of server commands in the console or in-game.
How do I get admin commands on my minecraft server? ›
Minecraft Server Admin/Op commands are entered into the chat window and are preceded by a “/” when playing in-game, but when entering commands at the server console you need to miss out the preceding “/”. help or ? Shows a list of server commands in the console or in-game.
How to enable cheats on a Nodecraft server? ›
Managing OP in the Nodecraft panel
You'll want to navigate to the "Game Settings" page on the left-hand side, and "Gamemode" tab near the top. Check the box on the "Allow Cheats" setting.
How to access server console in Minecraft? ›
How To Use Your Minecraft Server Console
- Click on "Servers" and then, "Manage Server".
- Click "Manage" again.
- Find "Console" on the left tab and click on it.
- You are now at the console which looks like a green and black text interface.
Firstly, ensure you're on the control panel for your Minecraft server. Under the Players page, you will find an OPs tab. Any players added to this list will automatically be op-ed by our system. You may need to restart your server after changing players.
How do I open server admin console? ›
Open from the Start menu
To open the administration console from the Windows Start menu on a server that is running one or more Azure DevOps components, enter and choose Azure DevOps Server Administration Console.
How to enable console commands on Minecraft server? ›
To enable command blocks on your Minecraft server:
- Log on to your server's control panel and stop your server.
- Once your server is offline, on the left side click Configuration Files.
- In the Configuration Files area, click Edit File next to the server. ...
- In the server. ...
- Set the Enable Command Blocks setting to True.
How to Enable Cheats
- Stop your server.
- On your Multicraft Panel, navigate to Files > Config Files.
- On the Config Files page, select Server Settings.
- Scroll down until you see the option on the left called allow-cheats . ...
- Press Save at the bottom of the page.
- Restart your server for the changes to take effect!
This is the recommended and easiest way to enable command blocks on your server.
- Head to the Configure section of your control panel.
- From within the Gamemode Settings Tab, ensure the Enable Command Blocks option is ticked.
- Hit "Save" and restart your server.
Console commands are a big part of how most players enjoy Minecraft. The way players use console commands for PC is simple. All you have to do is open the chat window in your game, and then type “/” plus your command. And there are loads of ways to modify most Minecraft commands.
You can drag the folder into the terminal window to get the path, if you have a GUI open. Run the server for the first time by typing java -jar minecraft_server.jar --nogui (replacing the jar name (minecraft_server.jar in this case) by whatever you named the jar file to be).
How do I join a Minecraft server console? ›
Joining your Minecraft Bedrock Server
- Access your control panel and locate your Server Address.
- Open Minecraft on the Xbox.
- Click Play.
- Navigate to Servers and select any of the available servers to open the server list. ...
- Once in-game, click Connect to a Server.
The easiest way to give yourself commands is to go into the console of your MC server and type /op [Insert IGN]. The console can be found on the screen that pops up if you run the server from your computer. If you're using a hosting service the console could be browser-based and available on the owner's settings page.
How do I give admin access to my server? ›
Steps to Add Admin Rights
- Step 2: Open compmgmt. msc using the run command or you can also use PowerShell!
- Step 3: Now in the Computer Management windows select Local Users and Groups >> Select Users.
- Step 4: Select Administrator to add the user account to this list.
- Step 5: Select Member Of >> Click Add.
Windows 10 Procedure
Select Family & other users. Select the user's name, and then select Change account type. Select Administrator, and then select OK.
How do I add commands to my minecraft server? ›
You will first want to head to the Game Panel. Once you are there, to the left of the panel click on Commands . This will open up a new page where you can view, modify, or create commands. To create a command, simply click Create Command to the top left of the page.
How do I get permission to use commands on my minecraft server? ›
In multiplayer, you'll need to have a high-enough permission level to be able to use commands. If you started your own server or Realm, you should have the permissions by default. If you're playing on someone else's server, you'll need to ask them for help.
How do you give yourself commands on your Minecraft server? ›
The easiest way to give yourself commands is to go into the console of your MC server and type /op [Insert IGN].
How do I run admin commands? ›
Recommended for advanced users only.
- Open the Command Prompt on your Windows computer. ...
- Connect your Android device to your computer using a supported USB cable for your device.
- In the Command Prompt window, enter adb followed by the desired command. ...
- Type the desired ADB command and press Enter to execute it.
